We quickly learned while working on older hot rods and muscle cars that a reliable source of switched 12-volt electrical power sounds good but frankly is often difficult to access. Most older cars usually offer only one switched 12-volt power connector on the fuse box and that is almost always taken by some accessory.
What is needed is an easily-accessed terminal block where you can connect to either 12-volt power directly from the battery or a switched 12-volt source. There are dozens of power strips on the market but they just didn’t fit our needs until we came across this simple dual-stud power terminal from Jegs.
This terminal has both 1/4- and 3/16-inch studs that can be used as separate power sources (switched and unswitched) or they can be easily joined together with a shunt. We like to mount a relay alongside this terminal and pull power directly from the battery with an inline 30-amp fuse to the larger ¼-inch stud which becomes straight battery power. We then feed switched power from the relay to the smaller 3/16-inch stud. Another feature of this Jegs terminal is that it comes with a snap-on cover that prevents accidental shorting across the terminals to ground. The terminal block is part number 555-10521
We’ve also mounted this terminal under the hood to give us easy access to electrical power without stacking a bunch of wires to the positive terminal of the battery. Nothing looks tackier than a stack of large cables stringing from the positive terminal of the battery. Plus, this terminal can be easily hidden near the battery using only one large wire feeding off the positive terminal. As an alternative to a stack of cables of a top terminal battery, consider a Group 34/78 battery that offers both top and side terminals to offer cleaner connections.
Click Here to Read the Full Original Article at DragzineDragzine…