Photo by: Giorgio Piola
Haas F1 Team VF-23, front end plate
Haas was among a handful of teams to include a blade style winglet at the start of the season, which was mounted on the endplate, above the last elements of the front wing. Combining with those elements the winglet helps to improve the outwash generated by the front wing.
Photo by: Uncredited
Haas F1 Team VF-23 technical detail
The VF-23’s engine cover features a raised shark fin allowing more cooling outlets to be deployed on the spine of the lower deck.
Photo by: Uncredited
Haas VF-23 technical detail
A close up of the intricate mirror housing design employed by Haas, which not only incorporated a slat-like surround but also a pair of vortex generators on the bottom of the mirror housing’s main body.
Photo by: Uncredited
Haas F1 Team VF-23 technical detail
Haas employed a bi-plane style beam wing arrangement at the Australian Grand Prix
Photo by: Giorgio Piola
Haas F1 Team VF-23 rear wing
In order to cater for the high-speed demands of the Baku street circuit, Haas modified the rear wing, with a large section of the upper flap’s trailing edge trimmed away.
Photo by: Giorgio Piola
Haas F1 Team VF-23 rear detail
The lower downforce rear wing was also paired with just a single element beam wing arrangement in Azerbaijan.
Photo by: Uncredited
Haas VF-23 floor detail
Top-down overview of the rear portion of the floor on the VF-23 with its cutout and the underfloor tab winglet.
Photo by: Giorgio Piola
Haas VF-23 front wing detail
A close up of the VF-23’s front wing which sported slot gap separator brackets with more of an aerodynamic influence from the Monaco Grand Prix onwards.
Photo by: Uncredited
Haas VF-23 rear detail
A new rear wing design arrived at the Canadian Grand Prix, complete with just a central mounting pillar, rather than the twin pillar arrangement used in races prior. Also note the introduction of the teardrop-shaped DRS flap pivots, first seen on the Alfa Romeo.
Photo by: Uncredited
Haas VF-23 detail
A close up of the cooling gills employed within the bathtub-like sculpting of the sidepod.
Photo by: Uncredited
Haas VF-23 detail
A close up of the floor’s two-tier leading edge and edge wing, with a Kiel probe array also mounted on its side as the team captures some data during practice.
Photo by: Uncredited
Haas VF-23 technical detail
A great view of the rear…
Click Here to Read the Full Original Article at Motorsport.com – Formula 1 – Stories…